Fusion 360 Post Processor

Posts : 27 Join date : 2021-03-15

Does anyone have information on using the GGFlex with Fusion360? Also Looking for values for Machine Configuration to input into the software.

thank you

Posts : 27 Join date : 2021-03-15

dmbe11 wrote:: Does anyone have information on using the GGFlex with Fusion360? Also Looking for values for Machine Configuration to input into the software.

thank you

I was able to find this information on Autodesk

https://cam.autodesk.com/posts/post.php?name=grbl

which is a file from the Post Processing Library on their site. Would this do the trick for setting up the GGFlex to work with Fusion?

Admin Posts : 132 Join date : 2020-10-09

dmbe11 wrote:

dmbe11 wrote:: Does anyone have information on using the GGFlex with Fusion360? Also Looking for values for Machine Configuration to input into the software.

thank you

I was able to find this information on Autodesk

https://cam.autodesk.com/posts/post.php?name=grbl

which is a file from the Post Processing Library on their site. Would this do the trick for setting up the GGFlex to work with Fusion?

Yup! There's a full writeup attached at https://www.autodesk.com/products/fusion-360/blog/fusion-360-grbl-post/ if you need, though it looks like you got it set up (just posting a reply for anyone down the road who wants more info on it).

» Post Processing Question